Farine

Crazy for Bread

Pavé au levain

Have you ever wished you could just bake (part of) your levain and eat it, so that you can savor its pure unadulterated flavor? Every time I feed it and breathe in its fragrance I wish I could do just that. But of course I resist the impulse (since it probably wouldn’t turn out too good as is anyway) and I just keep on enjoying the scent.
Recently however I have been feeding my liquid levain (not the one I made with Gérard) some high-extraction organic flour from Québec I received as a present and the levain started producing such aromas that the impulse to just bake it became irresistible. That’s when I remembered the pavés au levain we made last spring at SFBI in Didier Rosada‘s Whole Grains workshop. So, yes, you can have your levain and eat it too. And I cannot even begin to describe how delectable the result is. Pure heaven!
Didier said hazelnuts and/or fruit can be added to the dough. But I don’t see how it is possible to improve on the flavor.

Ingredients (for 4 smallish free-form pavés):
295 g white starter @95% hydration, fed three times with high-extraction flour (if no high-extraction flour is available, use 80 % organic all-purpose flour and 20 % organic whole wheat flour after sifting out the coarser bran particles)
736 g high-extraction flour
573 g water (I started with 442 g and added more water on the go until the dough reached medium soft consistency)
18 g salt
7 g diastatic malt powder (if no malt had been added to the flour at the mill, which was the case for this Quebec flour)

Method:

  1. Mix flour and water (at the required temperature to get a final dough temperature of 70-73ºF/21-23ºC) and let rest (autolyse) for about 45 minutes
  2. Add the levain and more water as needed, mix until very soft
  3. Add the salt (I love the way watching the dough tighten up once the salt is added and I now always add the salt towards the end of the mixing as I find it makes it easier to get the right consistency)
  4. Add water if needed after incorporating the salt
  5. Transfer dough (which will be rather slack) into an oiled bin, cover tightly and let ferment at warm room temperature for two hours with one fold after the first hour (since the room was cool, I let the dough ferment three hours with one fold after two hours)
  6. Invert the dough onto a table dusted with flour, then cut squares or other shapes free-form using a sharp dough-scraper
  7. Transfer to a baking sheet covered with flour-dusted parchment paper, dust with more flour and let rise, covered, for an hour and a half
  8. Pre-heat the oven at 450ºF/232ºC after putting into it a baking stone and a heavy-duty metal pan (for steaming)
  9. Gently slide the breads onto the hot baking stone, add one cup of water to the metal pan and quickly close the oven door
  10. Bake for 35 minutes (a bit longer if you made big loaves, a bit less if you made individual ones). Check at mid-point to see whether or not you need to rotate the loaves (Didier advises keeping the oven door ajar for the last 10 minutes of baking but I think that mostly apply to professional ovens. If there is one thing that my home oven does well, it is exhaling steam full-speed the minute it detects any. So I didn’t open the door)
  11. When done, let cool on a wire rack and prepare your taste buds for rapture!

The pavé au levain goes to Susan, from Wild Yeast for Yeastpotting.

Bread Bowls

Going back to the buttered baguette “soldiers” we used to dip in soft-boiled eggs when I was a child, I have always been fascinated by bread as a container or as silverware. I may yet make a “pain tranchoir”, a slab of bread on which medieval ladies and lords heaped their meat as the valets made their way around the great halls with chunks of roasted animals on huge platters. The bread would slowly absorb the dripping juices and since the mighty only ate the meat itself (which they cut with a knife close to their mouths), it was distributed to the poor (or sometimes sold to them by the servants) the day after, nourishing and flavorful.

Maybe I’ll try that over the summer. Mighty Man can have the steak and, as I’d pick bread over meat any time, I’ll have the humble tranchoir.
In the meantime, I like the idea of making bread bowls as vessels for soups (here a New England clam chowder), salads, chilis, appetizers, side-dishes, etc. (for some suggestions, check out The Sourdough Bread Bowl Cookbook, by John Vrattos and Lisa Messinger).
This time (I made the dish for the first time last year, using baguette dough, and posted about it here on my French blog) I made the bowls out of the same batch of dough as the rustic batard. The dough was a tad too wet (85 %) for the purpose. If you make the dough specifically for the bowls, you may want to go for a lower hydration rate (maybe 70-72 %) as it will make it shaping easier.
However I was more or less able to reproduce the technique that Gérard demonstrated for me on a piece of his firm levain (a much less hydrated piece of dough) last time I visited.

Gérard says that we are going to let the dough rest a few minutes and that he made one a bit bigger as the other.

Gérard says the shaping is the same as for a brioche, the idea being to embed the top (or head) in the main ball. During the proofing, the dough will rise in a pear-shape (or cone). No scoring is necessary if the top is well buried in the main part as the base will widen a bit and get more stable. The lid is cut out after the baking.
Gérard offered a further tip, which is to melt some butter and after scooping out as much of the crumb as possible, to use a brush to gently (and sparingly) “paint” the inside of the bowl with it. The bowl is then put in the hot oven for about 5 minutes until nice and crisp inside.
For last night’s soup, I got my inspiration from Barbara Kafka’s recipe for clam chowder in Soup – A way of life, which I adapted somewhat. For instance I used canned minced clams and bottled clam juice instead of fresh clams which I would have had to scrub and cook myself. I also added a tiny bit of bacon (about 1 strip, chopped in tiny pieces and cooked separately until crisp).

Ingredients (for 2 bowls):

  • 2 baked 270g-bread bowls (you can make the bowls smaller if you’d rather serve the soup as a first course. Even as a main course, we ended up eating only a small part of the bowl)
  • 15 g butter for the soup itself + 30 g to “paint” the inside of the bowls
  • 10 g unbleached all-purpose flour
    ground mace to taste (I didn’t have any and used freshly ground nutmeg) 
  • A pinch of cayenne pepper
  • 1 medium yellow onion, finely chopped
  • 225 g firm potatoes, peeled and diced
  • 125 g heavy cream (or more to taste)
  • 1 10-oz (280 g) can of chopped clams, drained
  • 1 bottle (450 ml) of clam juice
  • Pepper and salt to taste
  • 1 strip of bacon, diced, cooked till crisp and drained on a paper towel
  • 1 bay leaf
  • 1 scallion, finely chopped

Method:

  1. Melt the butter in a medium saucepan. Stir the soup flour, the mace (or nutmeg) and the cayenne pepper. Cook over low heat for 2 minutes, stirring
  2. Stir in the onion and cook, stirring and scraping the flour from the sides of the pan frequently, for 10 minutes, or until the onion is translucent
  3. Slowly whisk the clam juice into the pot until the mixture is smooth. Stir in the potatoes and the bay leaf. There should be enough liquid to cover the potatoes. If there isn’t, add additional water to barely cover them. Bring to a boil, stirring frequently. Lower the heat and simmer for 12 minutes, or until the potatoes are almost done
  4. Stir in the clams and cream. Heat through. Remove the bay leaf. Check the seasoning
  5. Carefully pour into the bowls, garnish with chopped scallion and bacon bits. Bon appétit!

The bread bowls go to Susan, from Wild Yeast for Yeastpotting.

Rustic Batard

As we (don’t) say in French, the proof is in the pudding, so as soon as I got home, I decided to give my new levain a run for its money (for info concerning this levain, see here and here). I chose to make simple batards, using 30% organic whole grains (60% red wheat, 30% spelt and 10% rye) which I milled in my little handmill (I have since purchased an electric one for various reasons, chiefly because I couldn’t get fine enough flour with the handmill and ended up wasting a lot of the nutrients present in the grain).
The bulk of the flour was Whole Foods’ 365 all-purpose organic and I used some raw wheat germ as well (to compensate for the coarse elements I had to throw away). Dough hydration was 85%, quite high but necessary considering the proportion of whole grains.
The resulting bread is true to its name, namely rustic in appearance and redolent with the flavor and fragrance of whole grains. Its crust and crumb are very pleasing. Since I now own an electric mill and will be able to mill flour to the exact degree of fineness I choose (without having to sift), I will probably try several different different combinations and permutations of flours, grains and hydration rates in the future. But at least I found out that the levain works well and is very flavorful, not sour at all…
I keep it at 65%, which I find a good compromise between firm and liquid. It isn’t too stiff to fold by hand (since the folding needs to be very gentle, it doesn’t stress my wrists which I have to watch as I already had surgery on both) and with the daily addition of 30% freshly milled whole-grain flours, it would become too hard to control if the hydration was higher, especially since I keep it at room temperature. I use 1% sea salt at each feeding to prevent the enzymes from running amok anyway. It is still a very young levain (not even one week old) and I am curious to see how it will evolve.
Calvel recommends using salt in the levain in Le Goût du pain (The Taste of Bread) (p. 61 in the French edition. I was unable to get the English translation from my local library, so I can’t give you the page number in English. Sorry about that…).
I wanted to find out a little more about the science behind this recommendation and found the following explanation in an old professional baker’s manual (J-M. Viard : Le Compagnon boulanger – Ed. Jérôme Villette – 1984, now sadly out of print, p. 229) :
“Pourquoi ajoute-t-on toujours un peu de sel au rafraîchi ? Parallèlement aux levures sauvages, l’acidité se développe, ainsi que certains enzymes appelées protéases. Ces enzymes ont une action néfaste sur le gluten et le liquéfient, ce qui rend la pâte molle et très collante ; le sel ajouté au rafaîchi bloque l’activité des protéases”. (Why add salt to each feeding? Parallel to wild yeast, acidity develops [in the levain] as well as some enzymes, called proteases. These enzymes have a harmful effect on gluten which they tend to liquefy, making dough slack and very sticky; salt blocks protease activity) (my translation).
And now, on to the bread…

  Process

  1. Mix the flours with most of the water (at the required temperature to produce a dough at 76ºF/24ºC) in the bowl of the mixer and let rest 45 minutes to one hour (autolyse)
  2. Add the levain (cut in small pieces like fluffy little pillows) and mix on first speed
  3. Continue mixing for a few minutes, adding the salt at the end (salt hardens the dough and according to Viard’s Le Compagnon boulanger mentioned above, adding it towards the end of the mixing protects against too much tenacity in the dough. I have heard and seen other bakers add it right after the autolyse in order to slow down the fermentation. As it was my first time adding it at the end, I can only say that it worked fine. But is it a rule or just because my house is kind of cool in the winter and fermentation is slower anyway? I don’t have the answer. I guess each of us would need to try both ways several times to see what the advantages and inconveniences would be in his home environment)
  4. Adjust the hydration with the remaining water (different flours require different hydration rates), continue mixing for a minute or two and turn off the mixer. The dough should be soft
  5. Transfer to a tightly closed oiled bin and set to ferment at 80ºF/27ºC (since my house is only at 64ºF/18ºC in the winter, I used the proof box the Man built for me, using the detailed explanations generously provided by Steve B. from Bread Cetera)
  6. Give the dough a fold inside the bin after one hour
  7. Give the dough another fold inside the bin one hour later
  8. Transfer the dough to a flour-dusted work surface and give it one fold (north-south), wait 10 minutes and give it another (east-west). Repeat until dough is strong enough for shaping (it took three folds at 10 minute-intervals in my case), keeping the dough covered between folds (in my case, the first fermentation lasted a total of 3 hours and 30 minutes)
  9. Pre-shape as desired, let the dough rest 30 minutes, covered
  10. Preheat the oven at 480ºF/249ºC (my oven doesn’t heat very well. A lower temperature setting might work just fine in your oven), taking care to put it in a baking stone and, underneath, a heavy metal pan for steaming (mine contains barbecue stones which we bought solely for steaming purposes)
  11. Shape as desired (in my case, two 500g-batards and three 330g-small boules, raw, respectively 417 g and 276 g after baking) and set to proof on a couche at 80ºF/27º (or use baskets if you have the right size available. I didn’t)
  12. When the loaves are ready to be baked (the imprint of a finger bounces back quickly), dust with flour, score (trying to make the cut shallow) and bake for 35 minutes, pouring a cup of cold water in the metal pan for steaming and turning the heat down after the first 10 minutes (in my case to 460ºF/238ºC)
  13. Remove from the oven and cool on a rack before slicing open

The Rustic Batard goes to Susan, from Wild Yeast for Yeastpotting.

Building a levain “à la Gérard”: Steps 2 & 3… and a misadventure

The day after, I came upon Gérard in early morning as he was dividing and weighing the dough. We kept company for a while, then I started browsing through his bread library and was soon engrossed in out-of-print books by Lionel Poilâne, especially Faire son Pain in which he explains how to build a levain chef (mother starter) at home.
I was surprised to read that, in the first step, Poilâne recommends leaving the future levain (50% hydration) to ferment for 48 to 72 hours at 72-75 º F/22-24 ºC, either in a tightly covered bowl or entirely wrapped in a floured towel. After that length of time, it should have grown by 1/4 and be hole-ridden. It is then mixed with flour and water and left to ferment again for 24 to 48 hours. After that, it will have grown by 1/3, have a spongy appearance and be ready to make bread.
Gérard’s method is a tad more involved, to say the least! The second step takes place 22 to 24 hours after the initial build. We took the container down (it had been sitting high on a shelf where the bakery is warmest), opened it and took a long sniff. The contents smelled wheaty and clean. Gérard brushed aside the coarsely milled grain and the disc of starter appeared. It was encrusted with a layer of dry flour and coarsely milled grain and long cracks had formed at the surface (the starter is ready for the second step when these cracks are at least one-inch long). It looked pretty lively:

Gérard folded back the crust and judged its thickness satisfactory:

I scraped most of the wet stuff off and harvested 200 g of crust. Gérard checked what I had collected and said that I could gone even dryer as the crust contains three times as many wild cells as the soft parts but that it would be okay.

Bearing in mind that the desired dough temperature was 81ºF/27ºC, I measured 280 g of water at 86ºF/30ºC and poured it over the chunks of crust.

While the crust was softening in the water, I measured out the salt and the malt and milled the blend of wheat, spelt and rye berries (see formula for exact amounts).
When the crust was soft enough (it took about 15 minutes), Gérard used an immersion blender to mix it with the water.

Then we mixed the starter with the flours and the malt, folded it over and over, added the salt and ended up with a plump ball again.

So far, so good. Everything was going as planned. The day after, I checked the young levain first thing in the morning. It had already almost tripled. We went ahead and did the fourth feeding (A3 in the formula chart). This time, we didn’t use any malt and the whole-grain flour was carefully sifted to eliminate any coarse piece of grain which would create shafts in the levain through which CO2 could escape.

Then we put it to ferment on top of the shelf again. After about one hour, it had already moved considerably. We sniffed it. It smelled delicious. Two hours later it had more than doubled its size and was nicely domed. Gérard said: “Let’s wait another hour. It should have tripled by then”. So we waited and when I got back to check it, I had a nasty shock.
It had flat-lined on us and its level was noticeable lower than an hour earlier. We opened the bucket. The levain had turned oily. No hole were visible. Completely limp, it poured out like cream. However no weird smell suggested a harmful bacteria was at work and the taste was normal.
Pandemonium ensued as Gérard went into emergency mode. Sorry, no action pictures! First of all I didn’t have the presence of mind to take any, then even if I had thought of it, I couldn’t have as he was giving orders as a captain aboard a sinking ship.
Soon I was running around milling wheat, spelt and rye berries, measuring water temperature and basically doing everything but mouth-to-mouth resuscitation to the ailing levain. In a nutshell, what Gérard decided to do was to feed it only freshly milled whole grains until it started acting normal again. That meant a lot of fresh flour to mill and to sift. Malt needed to be added, etc.
After two such feedings (no specific time-frame: each time, we waited until the levain had more than doubled to feed it again), it looked decidedly better, albeit still on the gooey side.

After the next feeding, it completely recovered and was ready to go home with me.

What happened? Well, the strange thing is that the night the levain went south, Gérard noticed a difference in his dough as well. It was slightly softer than usual, although nothing that he couldn’t handle. But the coincidence was interesting. As we were discussing what happened the following morning, Gérard had an illumination.
He had had a delivery of all-purpose flour the day the levain fell ill and he had used this new flour in his dough. Since he had loved the way it handled in the first batch, he had told me to use it for the levain as well. Now he suspected the flour was the culprit. He asked me to check the code number on the bag.
The code was 353, which meant that the flour had been milled on the 353rd day of the year, i.e. on December 28. January 6 was the day of the incident with the levain and the dough. The flour was nine days old! Not old enough to be used for bread-baking if fermentation was to last longer than 4 hours.
The levain had been gorgeous until the four-hour mark, then had slumped. According to Gérard, his batch of dough had been okay because fermentation had lasted three hours. He surmised he would have been in trouble past the four-hour mark.
I would need to do some reading to grasp the science behind what happened. But I remember from my classes at SFBI that flour needs to age for about 3 weeks after milling: the oxydation that occurs during this aging period improves the stability and resistance of the proteins present in the flour. A flour that hasn’t aged properly makes an over-elastic dough which tends to grow “flat” and to stick. Flatness, stickiness and over-elasticity are certainly the right words to describe our levain after we started using the immature flour.
I still find it absolutely striking that a dough that seemed to be literally bursting at the seams and ready to dance out of its container should fall back and slump in the space of an hour. It was nothing short of a spectacular event (for a levain aficionado, I mean, as I don’t think the movie would have won me an Oscar even if I had been at the ready with my camera).
The flour we milled on the spot didn’t have time to mature either but it contained a healthy dose of protein-rich spring wheat to help with tenacity and enough wild yeast to breathe a new life into the dough. The addition of malt meant that the yeast would have enough food during the fermentation process.
I learned from this whole incident that a levain which behaves strangely isn’t sick and ready for the trash as long as it doesn’t smell or taste funny.
I also learned that things are way more interesting when they go wrong…

Related posts: